Product introduction
The compound is under composite preparation by many kinds of additives such as extreme pressure anti wear agents, antioxidants and corrosion inhibitors etc. It is used to prepare low-zinc, high pressure antiwear hydraulic oil. The product is with stable quality and has excellent extreme pressure anti-wear property and thermal oxidation stability; the oil replacement intervals are significant extended.
Technical data
Item | Technical data | Typical data | Test method |
Kinematic viscosity，40℃，mm2/s | Actual measurement | 58.32 | GB/T 265 |
Density，20℃，g/cm3 | 0.9-1.1 | 1.06 | GB/T 1884 |
Flash point (opening)，℃ | No lower than 100 | 130 | GB/T 3536 |
Zinc content，% | 1.5-3.0 | 1.86 | ASTM D5185 |
Sulphur content，% | No lower than 2.5 | 3.39 | ASTM D5185 |
Phosphorus content，% | No lower than 3.0 | 3.83 | ASTM D5185 |
Recommended use level:
0.8%, the anti-foaming agent needs to be added separately.
Standards compliance
GB 11118.1-94
DIN 51524（Ⅱ）
DENISON HF-0
Packing and storage
The maximum temperature should not exceed 60 ℃ for the storage, handling of the product and preparation of oil; for long-term storage, the maximum temperature should not exceed 45 ℃, be sure not to touch water. This product is not flammable, explosive. General preventive measures in handling of chemicals shall be followed in the process of using.
If the oil splashes onto skin, detergent, soap and water can be used to wash it thoroughly.
